The porcelain throne within every bathroom looks like a permanent fixture. It’s certainly durable for the entire family to use for many years. However, there are clear signs when it’s time to replace the household’s toilet. Explore the factors that tell you when a toilet must be replaced. Your plumbing will be better off with the improvement.

Average Lifespan of a Toilet

Angie’s List reports that toilets should be replaced every 15 years with normal, hard water running through the system. Between mineral buildup, varying degrees of use and maintenance frequencies, toilets take on a lot of wear during their time in the bathroom. Scratches even contribute to aging and decline.

It’s possible to prolong a toilet’s lifespan with gentle and frequent care, but some issues are unavoidable. How often should a toilet be replaced? Two decades is probably pushing the envelope on a truly reliable toilet. It might be prone to leaks or breakdowns afterward.

Visible Cracks

How long do toilets last? That answer relies heavily on its use in the home. Some toilets see a busy household, whereas other toilets might be used only several times a week. If you see visible cracks on the toilet, it’s on its last legs.

These cracks might be shallow, which allows the toilet to be functional for the moment. There are no active leaks. Those cracks, however, will slowly grow deeper and longer, suggests The Spruce. Water damage is a real concern at this point.

Cracks occur from both damaging cleaning techniques and aggressive use. Caring for the toilet like the porcelain material that it is will improve its longevity.

Plumbing Woes

You might have a plumbing issue in the drain below the toilet. The bowl and tank aren’t necessarily bad, but the pipes require repairs. If you must remove the toilet to access the plumbing anyway, it’s a smart idea to consider a replacement project. The toilet will already be disconnected. Your plumbing can be fixed and tested. By adding the new toilet, you create a brand-new system for the bathroom. Placing the old toilet back onto the new plumbing may not have the best functionality afterward.

Internal Issues

Most toilets are still mechanical wonders when you peer into the tank. Flappers and levers control the water level. Although a mechanical issue every now and then is understandable, the toilet might have ongoing problems that aren’t normal. If you find yourself constantly replacing or adjusting the internal parts, it’s time to consider a new toilet.

The parts being added to the old bowl may not be exactly fitted to the porcelain openings. Leaks become commonplace. Replacing the entire toilet with new internal parts can solve all of these problems.

Water-Saving Concerns

It’s time to replace the toilet when water savings is a concern. Today’s models are highly efficient; it’s possible to see the savings on your water bill. Older toilets used an astounding amount of water with just one flush. That’s not necessary anymore.

Replacing the internal parts on an older toilet won’t create the water savings that a new toilet system produces either. With a new purchase, the modern toilet will pay for itself with lower water bills in the end.

Never-Ending Clogs

Modern toilets save water and provide enough flow to move debris into the plumbing system. Flushing two or three times shouldn’t be necessary. Think about replacing your toilet when clogs seem to be commonplace. The plunger shouldn’t be used too often in the household, for example.

The actual toilet bowl and tank might be perfectly functional otherwise, but don’t use this reasoning to keep a clogging system in place. The plumbing remains compromised when items won’t smoothly move through the pipes. More serious issues can follow.

Wobbling Fun

The Family Handyman¬†encourages you to replace the toilet when it starts wobbling. This motion isn’t a result of a loose seat, however. The wobbling might be originating from the base where it meets the floor.

Major leaks are possible when wobbling is in play. Take a look at the toilet’s base in these cases. The porcelain may be actively breaking away from the floor connection. At best, the toilet is unsafe to sit on. It takes at least a decade for this type of damage to occur, and it should be addressed as soon as possible.

DIY Replacement Cost

The cost to replace toilet bowls as a DIY project simply depends on the model you’ve chosen. Toilets usually cost around $100 or more, depending on the style. There are one- and two-piece models along with various designs and colors.

The real cost is your time and effort. If you’re an experienced handyperson, a toilet project is relatively simple to complete. People who’re new to the process might require more time.

Collect all the necessary accessories, such as the wax ring, in order to properly seat the toilet into place. Once installed, the toilet lasts another 10 to 15 years.

When to Call Fountain Plumbing

How much does it cost to replace a toilet? This might be your first question to the professionals when a DIY project isn’t possible. There’s no harm in calling in the experts. Home Advisor reports that your professional replacement will cost between $200 and $500.

There are several reasons why you might want a plumber on the job, such as:

  • Possible plumbing problems associated with the toilet
  • Warranty coverage concerns

Plumbers might offer their advice when it comes to toilet choices or plumbing upgrades. This discussion is even more important if you have a particularly older home and toilet system. Upgrades may need extra accessories in some cases.

If you’re not comfortable with a DIY project when it comes to toilet replacements, Fountain Plumbing is always ready to serve your needs. Compare costs and time commitments as you contemplate a toilet upgrade. The bathroom will ultimately have an enhanced value as a result of your efforts.