The pedestal sink makes a bathroom feel spacious, and you can complement the new look by fitting new lights and mirrors for a much more prominent effect. Replacing your old vanity cupboard with a pedestal sink is one of the snappiest and most effortless approaches to redesign a bathroom. We ought to caution you pedestal sinks can be precarious to install, notwithstanding professionals. Regularly you will find the funnels aren’t in the correct position, making it hard to fit the pedestal set up and interface the pipes for them to look pleasant. In some cases, you may find that there’s no floor tile underneath the vanity cupboard, so you’ll need to fix or supplant the floor. Furthermore, you may likewise need to fix missing baseboards to install the pedestal sink.

In the accompanying article, we are going to show you the best way to deal with well-known issues step by step on how to install a pedestal sink. Once you have all the materials and tools, you’ll need to use, and you have gotten clearance from building inspections department you’re set to go

Dismantle the Old Sink

Before you begin installing a new pedestal sink, shut off the water at the mains supply first. Besides, you need to turn off the water heater and the gas switch if available. Then you can now continue to drain plumbing by opening a faucet and remove the old sink trap.

Remove the old bath stops. Once the pipes for a pedestal sink is uncovered, so all the pipes, including the stops should be new. It will likewise be essential to introduce another chrome lavatory stop and escutcheon.

Step 1 

Utilizing two movable wrenches, expel the old stockpile prevents from the hot and cold water lines, and after that remove the old escutcheon covers.

Apply Teflon tape on both stub outs, and after that, add new escutcheon covers by sliding the spread over the roughed in the water supply. Then thread new supply stops on both and utilize a wrench to fix everything up. You must ensure that the gulf valve is in the upright position.

Next, you secure the new escutcheon covers by utilizing two wrenches to remove the old supply stops from the hot and cold water lines, and afterward remove the old crest covers (escutcheon)

Apply Teflon tape on both stub outs, and after that, add new shield covers by sliding the spread over the roughed in the water supply.

Then threat new supply stops on both and utilize a wrench to fix everything up while ensuring that the inlet valve is in an upright position.

Then you need to unscrew the old collar nut and after that slide the new P-trap escutcheon cover over the drain hole

Step 2

Once you are through with step one, place the Lavatory on pedestal and set it in the ideal area you want it installed. Ensure that the bathroom is level.

Make sure to center the pedestal to the channel gap on the wall. When the pedestal is centered and leveled, use a pencil to check where the sink will sit against the divider

Then place the Lavatory on the pedestal, and then set it in the ideal position, ensuring that the Lavatory is level

Make sure to center the pedestal to the drain gap on the wall. When the pedestal is centered and level. Then use a pencil to check where the sink will sit against the wall.

Step 3

Once again, use a pencil to stamp where the anchor gaps will be drilled in the wall and floor. After the holes have been checked, remove the sink from the zone. Introduce the slack screws into the wood backing behind the wall. Guarantee your bit is in any event a size littler than the slack jolts so they’ll hold tight in the wall.

Afterward, drill two 1/4″ openings for the holder jolts at the imprints on the wall. Thread the hanger jolts into the wall. Leave roughly 1-1/4″ of each fastener uncovered between the top nuts and the completed wall.

Mount the Pedestal to the Floor

Mount the pedestal sink on the floor for steadiness. The type of the floor will determine the method you use for mounting

In situations where you have to penetrate the concrete, utilize a mallet drill and a solid piece. Include a loose screw, and afterward snag it down with a ratchet. Be sure not to over-fix as it might break.

For boring into the tile, utilize a tile bit to penetrate the gaps. A tile bit has a head like a sharpened stone. Drill into the grout line if conceivable to forestall harm to the tile.

Don’t make a difference sealant around the base of the pedestal. It could harm the floor if the sink ever should be moved.

Dress the Pedestal Sink

Dressing the sink intends to put all or majority of the equipment on the sink before installing

Install the spout and handles. Use a handyman’s putty around the seal to ensure its watertight. Supplement the valve bodies into the correct mounting gaps, ensuring that the valve body marked “cold” is introduced to one side of the central opening. When the valve body is set up, slide the metal washer and nut onto the base, and after that, fix it down.

Place the seal ring over the spout body, and afterward embed the spout into the sink. Spot the metal washer and nut onto the spout shank and fix the nut with a wrench.

Introduce the high temp water valve a similar path as the cold water valve. Remember to utilize handyman’s putty when carrying out this exercise.

Mount the Supply Lines

With the equipment mounted on the top side of the sink, install the stock lines underneath. Screw the stock tee to the base of the spout, and afterward fix it up with a couple of slip joint forceps.

Append the adaptable supply lines to the hot and cold valve bodies, and afterward connect them to the supply tee. Interface both the hot and cold versatile supply lines to every one of the valve bodies, fixing every one with a wrench.

Interface the Flange and Drain Body

Apply enough measure of handyman’s putty around the base of the flange, and after that, place it in the sink.

Join the nylon O-ring and nut over the flange. Fix with slip-joint pliers. Join the drain body to the flange, while making sure you tightly seal it.

Use Teflon tape around the threads of the tailpiece to prevent water from spilling.

Screw the tailpiece to the drain body. Append the interfacing bar to the drain body, and after that, connect the plug bar from the back of the faucet to finish the drain assembly.

Attach and Install the P trap

Put the Lavatory on the pedestal with the goal that the holder jolts extend through the bathroom openings. Then introduce the cap nuts and washers, and after that, fix it with a plier.

With the sink now mounted, connect both the hot and cold water pipes. Fix with slip-joint forceps.

Finally, secure the end of the p-trap to the rear end of the channel altogether. Join the p-trap to the tailpiece by screwing it into place, utilizing the threaded connection.

Turn the water on at the mains supply and the water heater. Once done, then open the faucet at the new sink, and afterward check for leakages.

If you adhere to the steps outlined above, you will have your bathroom installed with a pedestal sink that will leave you never wanting to leave!